Lorentz Pumpe Schwimmerset NM

Two floats for the LORENTZ Solar Meadow Pump, providing both dry run protection and monitoring of automatic tank filling(Tank Full Switch).

Dry Run Protection :

The S1 Dry Run Protection provides a reliable method of protection against dry running. It detects that water is in a
well, tank or other water source. The S1-Dry Run Protection is usually attached to the hose above the pump outlet and connected to the controller. When the accessory becomes dry (the water level is below the dry run protection), the pump shuts off to prevent dry running

Features :

• Mechanical float switch
• Cable length : 15 m
• Restart time after dry detection : 15 min
• Housing material : Polyoxymethylene
• Net weight : 0,6 kg
• Reliable protection against dry running.
• Easy to install with pre-mounted plug
• IP68

Tank Full Switch :

The S1 Tank Full Switch or "float switch" is used to control the water level when filling a water reservoir or pond. When the water level in the water tank reaches the maximum level, the LORENTZ S1
controller stops the pump and indicates "tank full" via the LED. The counterweight on the cable can be adjusted to turn the switch on and off at different heights.

Features :

• Mechanical float switch
• Cable length : 10 m
• Material float : polypropylene
• Net weight : 1,2 kg
• Reliable water level detection
• Simple plug-in installation
• Trouble-free operation
• Insensitive to rotation
• Corrosion-free
• IP67 RATING