BLOCK BOND®, a claw adhesive of the latest generation, was specially developed for professional claw caretakers. Due to the innovative adhesive technology, the new 2-component polyurethane adhesive can be used efficiently and successfully in summer and winter (even under extreme conditions and temperatures ranging from -10 C° to + 30 C°). Significant advantages are the high strength as well as the enormous speed in processing. The patent-pending BLOCK BOND® formulation also completely dispenses with carcinogenic ingredients and fulfils all requirements and official restrictions according to the REACH regulation.
For the application of BLOCK BOND® claw adhesive you need the original mixing nozzles (article no. 38106653100 or 38106653101). Only use the matching dispensing gun (article no. 38106653200), which has been specially developed for these cartridges. The use of other mixing nozzles or dosing guns constitutes improper use and may damage the cartridge.
Chemical base: polyurethane
Mixing ratio: 1:1 max.
Gap bridging: optimum 3 mm, max. 10 mm
Application temperature: 0 °C to +30 °C
Storage: -10 °C to + 23 °C (frost-proof product!)
Shelf life: 12 - 18 months
Curing times at room temperature
Working time: 10 - 20 s
Skin forming time: 15 - 25 s
Setting time: 2:00 - 2:30 min
Curing time / time to full load: approx. 3:30 - 4:00 min
Temperature development: approx. 65 °C after 2:00 min
Do you have questions about our products? Our contact persons are at your disposal.
Tel: +49 (0)5631 565-100
H317 May cause an allergic skin reaction
H332 Harmful by inhalation
H335 May cause respiratory irritation