Horses
Cattle & Cows
Sheep & Goats
Pigs
Dogs & Cats
Poultry
Small animals
Wildlife defence
Wolf defence
horizont 12 V / 230 V energiser- ranger® AN490
ranger® - Our professional series for high demands and dry site conditions. The ranger pasture fencing devices are ideally suited for grazing animals such as cattle or horses.
- Dual device - 230V / 12V parallel operation
- The 6-mode functions ensure additional energy savings, more efficiency and lower operating costs
- Impulse Control - Error monitoring clock sequence
The ranger ® AN490 electric fence can be connected to 230 V mains power and a 12 V rechargeable battery at the same time. In the event of a mains power failure, uninterrupted operation is guaranteed via the battery. Optionally, the electric fence can also be operated with a solar panel.
The flexible 6 modes function allows you to set the pulse sequence for your fence as needed. In addition to the power saving circuit, the output energy level (APN = automatic power level) is set in steps up to 60% of the set maximum energy and is automatically adjusted when the load changes, e.g. due to vegetation on the fence. For greater safety of people and animals, the "Impulse Control" function switches the electric fence off or reduces the output energy in the event of an impulse being emitted too quickly (e.g. technical defect). The fence insulation indicator "System Control" shows the insulation status of your pasture fence in 6 levels. If all 6 LEDs light up, the fence insulation is good and little energy is required. The lower the number of LEDs lit up, the more discharges there are such as overgrowth or poor grounding and the higher the energy consumption.
With the convenient on/off switch on the electric fence unit, there is no longer a need to turn off the power by a fence switch or by pulling the plug. The 3-stage LED display "Energy Control" provides a quick check of the battery capacity and also shows you the activity of the electric fence unit by flashing in time with the pulse output. Due to the special power saving circuit, the power consumption of the electric fence device adapts to the fence, which ensures less energy consumption, less environmental impact and lower costs.
The two fence outputs offer different output energies (full strength and more harmless energy limited to 1 J) for flexible operation of a large and / or a small pasture. The clear 6-step LED voltage display allows easy monitoring of your electric fence remotely. Our electric fencers are made of high quality plastics and are UV resistant, splash proof, torsion resistant, impact resistant and oil resistant. This guarantees you many years of durability of the electric fence device.
The electric fence unit is suitable for fence lengths (medium vegetation) up to 20 km.
We recommend to set up the electric fence device with 2 grounding rods for optimal herding safety.
Electric fence, power supply, fence, ground and battery connection cables are included.
- Dual device - 230V / 12V parallel operation
- The 6-mode functions ensure additional energy savings, more efficiency and lower operating costs
- Impulse Control - Error monitoring clock sequence
- Sytem Control (Argutektor) - display of fence isolation
- Energy Control - 3-stage LED display for battery capacity and activity of the device
- 6-step display to control the fence voltage
- Practical with two fence outputs - strong and extra strong
- Made of high quality plastic (PC) - UV stabilized, splash-proof and oil resistant.
- On / Off switch
- Former article name: ranger® AN70
- Suitable for grazing animals such as cattle and horses
- Two fence exits for the operation of a large and a small pasture or paddock
- Connection socket for the power supply unit on the rear panel
- Microprocessor control
- Hanging device for wall mounting
- Ventilation slots for the escape of condensation water
- Practical with two fence exits - strong and extra strong
Product safety information
| Responsible person | manufacturer information | |
|---|---|
| horizont group gmbh | |
| Homberger Weg 4-6 | |
| 34497 Korbach | |
| Germany | |
| Phone: +495631565100 | |
| E-Mail: animalcare@horizont.com |
Warning and safety information energiser
- Follow the instructions for use
- Warning of electrical voltage
- This warning stands for possible harmful situations caused by electrical voltage, which can lead to serious injury or death if not observed!
- Fire hazard warning
- Warning - there is a risk of smouldering fire if heat builds up. The appliance must not be covered by materials etc. during operation, as this can lead to heat build-up and possibly to fire. Therefore, do not install in areas at risk of fire (e.g. hay and straw stores)
- Warning! Repairs may only be carried out by qualified persons. Only the replacement parts specified by the manufacturer may be used. We reserve the right to make technical changes!
- Please do not cover the electric fence with a plastic bag. Fire hazard due to overheating
Detailed documents can be found in the download area of the product.
Your direct line to us
Do you have questions about our products? Our contact persons are at your disposal.
Tel: +49 (0)5631 565-100
Mail: animalcare@horizont.com
Repair service
Reliable, competent and fast contact
Good service plays a major role at horizont. In our in-house repair workshop, experts are available to assist you with words and deeds. In case of a defect or damage of your device (e.g. due to lightning strike or moisture ingress), horizont's technical service will be at your disposal at short notice.
Many of horizont's specialized trade partners can repair your device on site thanks to simple modular construction or your device will be repaired in the service center in Korbach and you will be helped with a loaner device during the short repair time (usually 48 hours).
During the subsequent safety inspection, all components of the device are tested and you receive a one-year warranty on the complete device.
Warranty extension for horizont energisers
Register now!
Take your chance and extend the warranty of your energiser by 1 year!
- Safety note: in 230 V operation, the device and the power supply must be installed in a room protected from moisture
- Tested and built according to the applicable EU directives and the safety standard EN60335-7-76 and DIN EN ISO 9001
