Horses
Cattle & Cows
Sheep & Goats
Pigs
Dogs & Cats
Poultry
Small animals
Wildlife defence
Wolf defence
horizont Solar panel 10 Watt, with plastic frame
- Robust plastic solar panel
- Environmentally friendly use of solar energy
- Mounting device for solar panel
Solar modules are widely used in which the cells are generously distributed over the module surfaces. These are mounted in a glass carrier, which is usually stabilized and held in place by an aluminum frame. These modules are sensitive to hard impacts or even twisting, since the modules are not very flexible due to their construction. In the modules of the AS devices, the cells are placed close together on the module in order to be able to generate a lot of power in a relatively small area.
The modules are mounted on a plastic carrier plate and covered with a transparent plastic layer. For stabilization, the modules are placed in a plastic frame made of polycarbonate. This makes the entire unit more flexible, but still highly stable.
The modules can be mounted on the solar bracket 14143, which can be used to attach the modules to the safety box, the carrying box or to poles. In this
way, the solar modules can be connected to all common starter batteries. A charge controller is not built into the solar modules and is not required for starter batteries, as long as batteries with up to 85 Ah are not charged with more than 10 watts. The solar modules with 20 or 30 watts can be clamped directly onto batteries with more than 85 Ah.
A fixed connection of solar module and the device has proven to be disadvantageous in practice, since the device can be supplied with energy via the solar module even though the device is disconnected from the battery.
The 10-, 20- and 30-watt solar modules are available with the 14462 solar mount, which can be used to attach the solar modules to the farmer® AN1000, ranger® AN2000, ranger ® AN3000 and ranger® AN4800 units. The solar modules are then connected in the devices to the printed circuit board on which a solar charge controller is installed. This then also enables connection to Super Vlies batteries. The 5 and 10 watt solar modules are available with a special solar bracket that allows them to be mounted directly on the farmer® ABN and hotshock® ABN units.
Scope of delivery:
- Solar module with battery connection terminals
- Robust plastic solar panel
- Environmentally friendly use of solar energy
- Mounting device for solar panel
- The cables of the solar modules without holder have a length of up to 1.8 meters
- particularly stable housing, impact-resistant plastic with UV stabilizer
- Solar charging control weather-protected - trouble-free charging of different types of batteries
- Tested and built according to the applicable EU directives and the safety standard EN60335-7-76 and DIN EN ISO 9001
- Suitable for: Electric fencers: trapper AN80, trapper AN120 Batteries up to 85 Ah For all 12 volt special batteries and all common starter batteries When used with super-fleece batteries, a suitable solar charge controller must be used
- Charge controller: Not required, as the charge controller is installed in the recommended horizont-pasture fence unit, or is not required.
- Solar panel: monocrystalline, plastic frame: Plastic
- Mounting: Mounting on the device: with solar bracket (14462) Floor mounting: with solar holder (14923) Mounting on carrying or safety box: with solar holder (14143) The stand stake can be firmly inserted into the ground The stand stake can be easily moved and placed next to the battery pack
- Tip The solar modules can also be combined with any other manufacturer's electric fence, provided that they are designed for this purpose. The cables of the solar modules without holder have a length of up to 1.8 meters, so that these are sufficiently long to establish the connection between the battery and the solar module. On the cables are crimped 6.3 mm flat plugs. Non-insulated crocodile clips are connected to these. Thus, the solar module can be clamped directly onto the battery, in order to simply attach the connection terminals of the electric fence device above it. Since battery devices often do not have an ON/OFF switch and are put out of operation by disconnecting them from the battery, the device can be easily removed from the battery while the solar module continues to charge the battery.